Complete Communications Engineering

MELPe TSVCIS Vocoder Software

Tactical Secure Voice Cryptographic Interoperability Specification (TSVCIS) is a specification developed to provide interoperability between next-gen tactical secure voice devices utilizing different vocoder rates, levels of encryption and forward error correction.

Request TSVCIS Brochurerequest demo

Tactical Secure Voice is a communication system which provides robust security on the transmission and reception of mission critical information.  TSVCIS specifies both Narrowband (NB) and Wideband (WB) Waveforms, which provides the framework for improved speech intelligibility, security, and robustness of defense radio communications. The NB Waveform implements MELPe at the standard data rates (2400, 1200 and 600 bps).  In the WB Waveform the bit rates of MELPe have been extended to include data rates of 8000, 12000 and 16000 bps. This allows for the radio users to selectively determine the characteristics of the radio communication. If the secure radio communication is noisy, a lower MELPe rate can be selected and the number of parity bits used for the FEC can be increased. On the other hand, a higher MELPe bit rate can be selected to improve the intelligibility of the speech, if the channel’s error rate is low. TSVCIS was designed to be inter-operable to with the Secure Communications Interoperability Protocol (SCIP), so the MELPe bit rate extensions were designed to easily switch back to using standard Narrowband MELPe.

VOCAL Technologies, Ltd. provides software solutions for core TSVCIS requirements:

VOCAL’s optimized fixed point TSVCIS software is ideal for a range of low power applications including, secure voice and radio, ground mobile and software defined radios as well as the Joint Tactical Radio System (JTRS), JTRS Handheld, Manpack and Small Form Fit (HMS) and Soldier Radio Waveform (SRW).

The use of TSVCIS with RTP and SDP is described in detail in RFC8817 – RTP Payload Format for Tactical Secure Voice Cryptographic Interoperability Specification (TSVCIS) Codec.

Our TSVCIS software is available either standalone, as an embedded software library, with a VoIP stack or as part of a complete design.

TSVCIS Narrowband Data Modes

The foundation of the speech coding for TSVCIS is the (MELPe) vocoder, which is commonly known in the U.S. as MIL-STD-3005 and in NATO as STANAG 4591. There are five main Narrowband(NB) Data Modes, in which TSVCIS utilizes all three rates of MELPe (2400 bps, 1200 bps and 600 bps). It is recommended to utilize the noise pre-processor (NPP) of MELPe. The NPP adaptively estimates the noise spectrum of the input speech signal and attenuates the noise components and enhances the speech.
All NB data modes encrypt the MELPe bits. Two of the modes use Bose-Chaudhuri-Hocquenghem (BCH) Forward Error Correction (FEC) to provide better protection against channel errors.

TSVCIS Narrowband Encoder
TSVCIS Narrowband Decoder
Bit Allocation for Narrowband Modes

TSVCIS Wideband Data Modes

TSVCIS specifies five different Wideband(WB) Waveforms. All modes encode speech at 8kHz based on the STANAG 4591 MELPe 2400bps, but offer expanded data rates of 8000, 12000 and 16000 bps. Two of the modes require an additional MELPe-base multi-rate speech coder. This Variable Data Rate (VDR) vocoder encodes a different number of bits based on the mode selected. Four of the modes use Forward Error Correction (FEC) to provide better protection against channel errors. It is required to utilize the noise pre-processor (NPP) of MELPe. The NPP adaptively estimates the noise spectrum of the input speech signal and attenuates the noise components and enhances the speech. All WB data modes encrypt the MELPe bits.e Interface

Bit Allocation for Wideband Modes

TSVCIS Appendix E – WB Voice 16 without FEC

This Wideband Data Mode has a data rate of 16000bps with a frame length of 22.5ms. This mode incorporates the 54bits MELPe 2400, along with an additional 280 bits from the MELPe VDR speech coding. This mode is intended for channels with low bit error rates (BER) as no FEC is applied, but provides improved speech quality over MELPe 2400.

PESQ Comparison

The TSVCIS Appendix E speech coder first applies the NPP to the input speech samples and the result is encoded by MELPe 2400. The NPP samples and the MELPe 2400 data are used to further encode the sample data. Finally, the MELPe 2400 and VDR bits are encrypted.

TSVCIS Appendix E Encoder

VOCAL offers optimized MELPe 2400, MELPe VDR, AES encryption software for support of this TSVCIS mode.

TSVCIS Appendix F – WB Voice 16 with FEC

This Wideband Data Mode has a data rate of 16000bps with a frame length of 22.5ms. This mode incorporates the 54bits MELPe 2400, along with an additional 120 bits from the MELPe VDR speech coding, 110 parity bits from FEC of the MELPe 2400 data, and 55 parity bits from FEC of MELPe VDR data. In channels with high BER, the FEC bits help maintain the speech quality.

TSVCIS Appendix F Encoder

The TSVCIS Appendix F speech coder first applies the NPP to the input speech samples, and the result is encoded by MELPe 2400. The NPP samples and the MELPe 2400 data are used to further encode the sample data. In Appendix F, FEC is applied pre-crypto on the VDR bits and post-crypto on the MELPe bits.

TSVCIS Appendix F - Packed Data

VOCAL offers optimized MELPe 2400, MELPe VDR, BCH FEC, Hamming FEC, AES encryption software to support this TSVCIS mode.

TSVCIS Appendix G – WB Voice 16 Gateway

This Wideband Data Mode is designed to be used at a Gateway between narrowband and wideband waveforms. All wideband modes use MELPe 2400 to be interoperable with NB modes. This wideband mode has a data rate of 16000bps with a frame length of 22.5ms. This mode incorporates the 54bits MELPe 2400, along with 110 parity bits from FEC of the MELPe 2400 data. At the moment, this does include a large number of unused bits provisioning for future applications of which may combine voice and data services.

The WB Voice 16 Gateway Encoder receives data from the NB waveform and extracts the encrypted MELPe 2400 bits and applies BCH forward error correction.

TSVCIS Appendix G Encoder

VOCAL offers optimized BCH encoder and decoder software for support of this TSVCIS mode.

TSVCIS Appendix H – WB Voice 12

This Wideband Data Mode has a data rate of 12000bps with a frame length of 22.5ms. This mode incorporates the 54bits MELPe 2400, along with an additional 180 parity bits from FEC of the MELPe 2400 data. WB Voice 12 provides two layers of FEC, making this mode preferred for channels with very high bit errors.

The WB Voice 12 Encoder first applies the NPP to the input speech samples, and the result is encoded by MELPe 2400. The MELPe Bits are twice encoded by BCH FEC. The MELPe 2400 Bits are encrypted.

TSVCIS Appendix H Encoder

VOCAL offers optimized MELPe 2400, both BCH FEC encoders and decoders and, AES encryption software to support this TSVCIS mode.

TSVCIS Appendix I – WB Voice 8

This Wideband Data Mode has a data rate of 8000bps with a frame length of 22.5ms. This mode incorporates the 54bits MELPe 2400, along with an additional 110 parity bits from FEC of the MELPe 2400 data. In channels with high BER, the FEC bits help maintain the speech quality.

The WB Voice 8 Encoder first applies the NPP to the input speech samples, and the result is encoded by MELPe 2400. The MELPe Bits are encoded by BCH FEC. The MELPe 2400 Bits are encrypted.

TSVCIS Appendix I Encoder

VOCAL offers optimized MELPe 2400, BCH FEC encoder and decoder and, AES encryption software to support this TSVCIS mode.

TSVCIS Software Summary

TSVCIS Information


Request TSVCIS Brochurerequest demo

supported platforms

VOCAL’s optimized vocoder software is available for the above platforms. VOCAL has updated its MELPe offering to include TSVCIS MELPe variations.  In addition, VOCAL also offers FEC software to complement our TSVCIS MELPe.  Please contact us for specific TSVCIS codec supported platforms and performance information.


More Information


Loading…

Loading…


Loading…

Loading…


Loading…

Loading…