VOCAL’s Fax Modem Solutions provide a range of fax modulations and protocols for a variety of facsimile applications and fax communications over Internet, Radio, Mobile, PSTN and other IP networks. Our Super/Group 3 fax softmodem designs include high speed V.34 and V.17 fax as well as T.30 protocol and T.38 fax solutions.
- Fax Modulations
- Fax Protocols
- Fax Command Set
- Fax Demodulation and Decoding
- Fax Diagnostics
- Fax over IP
- Fax over IP Server Library (FXSRV)
Fax Soft Modem
All of VOCAL’s facsimile modulations and data streams can be controlled with our T.30 protocol functions or with VOCAL’s facsimile service class 1 command sets (EIA-578 and T.31). The T.30 functions could in turn be controlled with VOCAL’s facsimile service class 2 command sets such as T.32 (known as fax class 2.1), EIA-592 (known as fax class 2.0) and industry standard (known as fax class 2). Typical systems can be configured to use T.30 Error Correction Mode (ECM), T.4 copy quality checking/corrections and perform image form conversion for T.4/T.6 and JBIG.
The line interface may be an analog front end (codec and DAA) or a digital interface such as T1/E1, xDSL, ATM, and ISDN. The application interface of this software can support a fax class 2/2.0/2.1 command set or may be used directly by an application.
The fax modem solutions use signal detectors to determine the progress of a call by audio means, obtaining user pressed DTMF digits and mode transitioning. The signal detectors and generators include:
- Call Progress Tone
- Both North American and International
- Dialtone
- Busy
- Remote Ring (Ringback)
- Congestion
- Special-Information-Tone (SIT)
- DTMF Detector
- Programmable Precise Tone Detector
- Fax/Data Modem
- Fax CNG
- Calling Tone (used by V.90, V.34, K56flex)
- CED/Answer Tone (used by Fax, V.90, V.34, K56flex)
- V.21 Ch 2 HDLC flags
- Other Data Modems: V.32/V.32bis, V.22/V.22bis/Bell 212, V.21/Bell 103, V.23/Bell 202
VOCAL’s fax modem software libraries include support for Super/Group 3 Fax as well as a complete range of ETSI / ITU / IEEE compliant algorithms. Our source code is optimized for performance on ANSI C and leading DSP architectures from TI, ADI, Intel, ARM and other vendors. VOCAL’s fax software may be licensed as a library or part of a complete design with custom solutions available.
Custom Fax Modem Solutions are available. Contact us to discuss your fax modem application requirements.
VOCAL’s solution is available for the above platforms. Please contact us for specific supported platforms.